Electric Diagram; Problem Solving - M Confort E2000 Manuel De L'utilisateur

MCONFORT E2000
IX. ELECTRIC DIAGRAM
micro computer control board
ACL
GND
X. PROBLEM SOLVING
Some mes some problems that may arise do not indicate that the equipment has been
damaged. Check these instruc ons before contac ng the technical service.
PROBLEM
The equipment does
not work
The equipment does
not cool
M4
POSSIBLE CAUSE
The connec on cable is not connected
properly.
The ON / OFF bu on has not been
pressed.
There is no water in the tank.
The water pump is blocked.
The prefilter is blocked by dirt.
M2
M3
M1
18
L
N 220V/50Hz
GND
SOLUTION
Confirm that the cable is properly
connected, both on the equipment
and on the wall.
Press ON / OFF a er connec ng the
equipment.
Fill the deposit.
Clean the water tank.
Clean the prefilter.