Descaling - OXO BREW Manuel D'instructions

The Clean button light will turn on after every 90 cycles as a helpful reminder to descale.
The warranty is voided if descaling is not carried out in accordance with these instructions.
1
Fill
Water Tank
Add descaling solution and
filtered water to the tank up to
the MAX fill line.The mixture should
not exceed the MAX fill line.
Make sure empty carafe is in place
with lid fully screwed on. Remove any
filters or the Single Serve Accessory
from the brew basket. Ensure brew
basket is securely in place.
Scale is a naturally occurring buildup of mineral deposits.
How often you should descale your Coffee Maker depends
on water hardness.
Buy descaling solution where household cleaning products
are sold; follow solution's recommended use.

Descaling

Your Coffee Maker will not work properly if it is not descaled regularly.
Using filtered water will help prevent mineral buildup.
2
Start
Clean Cycle
Slide switch to Carafe mode.
Press Power, then press the Clean
button to start the clean cycle.
When clean cycle is complete,
machine will chime and Clean button
light will turn off. To cancel the cycle,
press the Clean button or Power.
Notes on Descaling
3
After descaling, fill the water
tank to the MAX fill line and run
a 5-8 cup water-only brew cycle.
Discard water before next use.
Clean cycle will take around 25 minutes. Time will vary
based on amount of mineral deposit. Allow cycle to finish
to ensure machine is fully descaled.
Start
Rinse Cycle
11