Rear Panel; Introduction; Check List; About Transmission - LENCO TFT-721 Mode D'emploi

10. Power key
11. Speaker

1.2 Rear panel

12
13
14
12. Cool holes
13. Stand
14. Li-ion battery cover

2. INTRODUCTION

2.1 Check list

The box for your TFT-721 should contain the following
items:
The TFT-721
Owner's manual

Remote control

Video output cable
Headphone
Power supply adapter (AC adapter)
Upgrade cable
Car Power Adapter
Accessorial Antenna

2.2 About transmission

Buildings, mountains and the surrounding terrain can
block Radio and TV signals. Depending on whether the
receiver is located in a valley, behind a mountain or in a
concrete building, the quality of reception may vary
considerably. As with most other transmissions, bad
weather affects reception quality. We recommend use the
accessorial long antenna instead of short antenna when
the signal isn't good, but not allow using other model
antennas.
2.3 About the portable receiving antenna and
accessorial antenna
Use the antenna for UHF channels 21-69 for DVB-T,
such as a directional antenna.
If possible, place the antenna by the window and
directed towards the TV transmitter.
The strength of TV signal varies according to
reflections from buildings or mountains. The signal
penetrates thick stone or concrete walls poorly.
However, a wooden building is not a big barrier to
digital TV signals.

2.4 Connecting the TFT-721 to the TV

Connect the TFT-721 CVBS jack to the TV CVBS
input socket for video.
Connect the TFT-721 Headphone jack to the TV
audio input socket for sound.
3. REMOTE CONTROL

3.1 Definition

This section describes how to operate the TFT-721 using
the buttons on the remote control. Using the buttons on
the front panel can also perform some of the functions.
3