Product Safety - Prem-I-Air Elite EH1550 Mode D'emploi

When used in a workplace, this product must be safety-tested yearly by a qualified
electrician (PAT Tested) in order to comply with the Electricity at Work Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.

This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without
supervision.

Do not cover. This symbol shown on the casing of the heater means
that the heater should not be covered.

For indoor use only.

Do not use in bathrooms, wet rooms or other damp locations.

Do not use this product with an extension lead or multi plug adaptor.

Not intended for use in Boats, Caravans or other similar locations.

Please allow for a 50 cm safe area around the top and sides.

Do not place the mains lead beneath a carpet or rug.

Please ensure the heater is not positioned below a socket outlet.

Do not use the heater in locations where paint, petrol or other flammable liquids
are used or stored..

Please ensure the heater is switched off and unplug when not in use, also keep
unplugged before assembly or disassembling parts.

Do not use the heater for other than its intended use.

Do no insert any object into the heater through the grilles. This may damage
the heater or result in overheating or electric shock.

Check the product regularly including the mains lead for damage. If any
damage is detected stop using it immediately and consult your supplier.

Only use this product on a flat, stable surface and not to be used in Boats,
caravans or other similar locations.

Do not leave this product unattended when in use.

For domestic use

There are no user serviceable parts in this product

Allow to cool down before moving

PRODUCT SAFETY

3