Installation Instructions; Cleaning Instructions - Drive Medical 12402 Mode D'emploi

installation instructions

Weight Capacity: 300 lbs (136 Kg)
1. Remove product from carton and READ ALL
INSTRUCTIONS CAREFULLY before attempting to
install product.
2. If installation of arms is desired:
a. Place one arm at a time into the arm holes on the
raised toilet seat (the brass buttons on the arm
should be facing out, away from the toilet seat.)
b. Depress the brass button in the front of the arm
while sliding the arm into position. You will hear a
"click" when the button is positioned properly.
(You will see the brass button pop through the
position hole.)
c. Repeat process for back of arm.
d. Repeat process for the other arm.
e. To remove the arm, depress the brass button while
pulling up on the arm. Repeat for the back of
the arm.
3. Remove existing toilet seat and lid from toilet.
4. Position toilet seat riser correctly on rim of toilet
bowl and center as necessary.
5. Attach original toilet seat to toilet bowl using the
6" bolts, with washers and butteryfly nuts provided, so
it is positioned over toilet seat riser.
6. Check for secure fit routinely before using product.
User's weight should be centered over toilet seat, not
too forward or too far to one side, as unit may tip.
7. If you have a style of toilet bowl that this product will
not fit properly, it is recommended that you
discontinue use.
Rev.5.02.05.15

cleaning instructions

1. Use a non-abrasive detergent or household cleaner
with warm water.
2. Rinse with warm water and wipe dry.
3. DO NOT USE AN ABRASIVE CLEANER OR CLOTH
with this product, as damage may ensue.
caution
1. Always be sure that the seat is correctly and securely
in place before using.
2. Physically challenged users should be supervised or
assisted whenever using this product.
3. This product is designed for use with the most
common types of toilet bowls. It will not fit all
toilet bowl types; be sure that the unit is correctly
installed, fits properly and is stable before use.
4. The arms are for the purpose of providing assistance
when getting on and off the seat. DO NOT try to use
the arms to support full body weight during transfer,
as this may result in failure of the unit.