Whale Twist Mode D'emploi page 14

EN
STEP 3.
Attach the shower hose to the valve housing.
Push in with long stem entering the slot and
then rotate clockwise by 30 degrees to the
locked 'on' position (See Fig. 14).
Fig. 14 Valve in locked position
STEP 4. ATTACH P CLAMP TO BULKHEAD
Screw p clamp to bulkhead ensuring it is located
at least 300 mm (12") from the valve housing
(See Fig. 14)
N.B. In order to securely fasten the unit, ensure that the p
clamp mounting surface is at least 19mm (
thickness.
STEP 5.
Close all the faucets and showers. Then turn on
the water pump and check all the connections
are dry. Test Whale Twist operation
(See section 10).
PLUMBING – COLD ONLY MODELS
(Product Codes: DS0001B, DS0002B, DS0011B,
DS0012B, DS0411B, DS0412B, DS0005)
STEP 1.
Connect shower hose to plumbing -
(See Fig. 15)
Connects directly to Quick Connect Plumbing,
for example use WX1504B (15mm equal straight)
or WX1503B (15 mm equal elbow).
To connect to all other systems, attach using
WX1532B ( 1 / " threaded female adaptor)
2
provided.
Recommendation: Valve WX1575(B) (optional) can be
inserted as an isolation valve.
14
Fig 14
Behind the
bulkhead
3 / ") minimum
4
Fig 15
hot
cold
NB: Ensure plumbing fittings are
pushed fully home (push in twice)
Behind the
Bulkhead
Valve in locked
'on' position
P-Clamp