Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
!
CAUTION
The water supply to the ice-maker must be turned on prior to
turning the ice-maker on. Failure to do so will cause rapid dry
cycling of the ice-maker mold heater resulting in temperature
control issues in the freezer compartment.
Ice-maker operation
•
The unit must be installed level for proper ice-maker
operation.
•
The shutoff arm wire must be down in its lowest position for
the ice-maker to operate. (See Figure 8).
•
When the freezer section and ice-maker unit has sufficiently
cooled, the ice-maker will harvest ice cubes automatically.
•
When the ice bucket is full, the ice-maker will automatically shut off.
•
You may manually stop the ice-maker by raising the shut off arm to the locking position at the up most position.
(See Figure 8).
NOTE
It is recommended the ice-maker is shut off when removing
the bucket, or ice may be dispensed onto the freezer
compartment floor.
If the ice is not used regularly, it will clump together with
time. For best ice results, discard ice in the bin as required
and allow the ice-maker to make a new fresh batch of ice.
Shut-off the ice-maker by raising the shut-off arm before
removing the bucket.
MODEL
"A"
24"
(61 cm)
MO24RFS
DOOR STYLE
(S) Solid Door
OPTIONAL ICE-MAKER
PRODUCT DIMENSIONS
ROUGH-IN OPENING DIMENSIONS
"B"
**34" to 35"
(86.4 to 88.9 cm)
OPERATION
Arm down, ice-maker
will operate
Arm up, stops operation
"C"
"D"
"E"
⁄
⁄
23
7
"
33
3
" to
8
4
⁄
(60.7
34
3
*
cm)
(85.7 to
88.3 cm)
9
Figure 8
CABINET
DIMENSIONS
"F"
"G"
"H"
⁄
⁄
23
23
"
26
7
"
46
13
32
32
"
(60.2
(66.6
(117.9
4
cm)
cm)
cm)
"J"
⁄
⁄
"
26
1
"
32
4
(66.7
cm)
Publicité
Chapitres
Table des Matières
Dépannage
