Publicité
M645 YCV4050
1. RTV MUST BE ADDED TO THE FOLLOWING CAPS
C1,C16,C19,C17,C70 BETWEEN C84,C28,C60,C15
BETWEEN C49,C50, ADDED TO C15,C7,C8,C3,C9
C56,C14,C6,C10,C4,C2 AND C12
2. C53 IS 22N FOR BOTH NORTH AMERICA AND CE
3. C3,C7,C6 MUST BE LOW PROFILE PT#5631
4. C8,C9 MUST BE LOW PROFILE PT#5879
5. BIAS 350mV ACROSS R91 AND 350mV
ACROSS R92
6. BEND C69 OVER Q7 AS FAR AS POSSIBLE BEFORE
ADDING RTV
7. PCBSA: BREAK OUT BOARD BEFORE TESTING
8.DO NOT PLACE C85 PLACE C17 10N #5834.
SEE LAYOUT DOCUMENTATION
PRODUCTION NOTES
3796 on this
device only.
Lots of goop
on the thermistor.
Z352
2 of 8701
2 of 3850
2 of 8832
- to hold z352 in place
PCB
2 of 8741
Publicité
