Manufacturer Information - BedJet VET-800NA Manuel D'utilisation

IMPORTANT INSTRUCTIONS: USER OPERATING MANUAL
20. Check your BedJet cord and plug connections:
a) Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat. Be
sure the plug fits tight in the outlet.
b) Heaters draw more current than small appliances; overheating of the outlet may occur
even if it has not occurred with the use of other appliances.
c) During use check frequently to determine if your plug outlet or faceplate is HOT! If so,
discontinue use of the heater and have a qualified electrician check and/or replace the
faulty outlets.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS DEVICE WITH ANY
SOLID‐STATE SPEED CONTROL DEVICES.
SAVE THESE SAFETY INSTRUCTIONS.
MANUFACTURER INFORMATION:
Revision 1.0
MODEL SKU: VET‐800NA
BEDJET LLC
17 Connell Highway
Newport, RI 02840 USA
Phone: +1‐401‐404‐5250
Email: info@bedjet.com
P a g e | 4