Before Installation - PRO-POINT 8548976 Manuel D'utilisateur

8548976
INSTALLATION
WARNING! All wiring must be installed by a certified electrician
according to the electrical safety. The ceiling heater must be
grounded in accordance with all national and local building codes.

BEFORE INSTALLATION

1. Disconnect the main supply connection.
2. The supply cables should be 10 AWG (5.3mm²) copper wires.
3. The heater must be connected to an individual branch circuit
protected by a 30 amp circuit breaker only.
4. The supply cables must be equipped with a dual pole circuit
breaker rating at least 240V 30A/pole as the main cutoff
switch of the power connection to the heater.
CAUTION! High temperature, risk of fire, keep electrical cords,
drapery, furnishings, and other combustibles at least 3 feet (0.9m)
from the front of the heater and away from the side and rear.
WARNING! To reduce the risk of fire, do not store or use gasoline
or other flammable vapours and liquids in the vicinity of
the heater.
Visit www.princessauto.com for more information
Industrial Ceiling Mount Garage
Heater, Low Profile
V 1.0
7