Maintenance And Cleaning - PRO-POINT 8548976 Manuel D'utilisateur

8548976
HAZARD OF ELECTRIC SHOCK, EXPLOSION,
OR ARC FLASH:
a. Wear appropriate personal protective equipment (PPE) and
follow safe electrical work practices.
b. A circuit breaker must be installed and serviced only by
qualified electrical personnel.
c. Always use a properly rated voltage sensing device to
confirm that the power is off.
The selector switch on the heater is only for function selection. Use
a circuit breaker as the power On/Off device. The circuit breaker
is to be installed by a certified electrician and should be located in
the line of sight from the heater location or should be capable of
being locked in the open position. Follow the operating instruction
to reduce the risk of fire, electric shock, injury or death to persons.
1. Switch on the circuit breaker to turn on the heater.
2. When the selector switch on the heater is at the Fan Only
position, only the fan is on.
3. Set the selector switch to the Fan and Heater position and
the heater will run at 5,000W and the indicator light
will illuminate.
4. To turn the heater off, switch off the circuit breaker. The
circuit breaker serves as the power disconnection method.

MAINTENANCE AND CLEANING

There is no user maintenance except for regular cleaning. All other
servicing or maintenance should be performed by a qualified
service technician.
Before any cleaning, make sure that:
1. Disconnect the power supply at the source. Switch off the
circuit breaker.
2. Wait for 60 minutes to ensure that the heater has had time to
cool down.
3. Your heater is now ready for cleaning.
Visit www.princessauto.com for more information
Industrial Ceiling Mount Garage
Heater, Low Profile
V 1.0
11