Installation Of The Rt Model In Tower Position; Installation Of The Rt Model In A Rack - Eaton Pulsar Serie Mode D'emploi

2.2 Installation of the RT model in tower position

2.3 Installation of the RT model in a rack

It is advised to install the battery EXB module(s) at the lowest position in the rack, then install the UPS above.
Follow steps 1 to 4 for module mounting on the rails.
1
The rails and necessary hardware (37) are supplied by EATON.
34008097EN/AE - Page 10
1
3
1
2
1
4
2
4