JVC KENWOOD PKT-23LF Mode D'emploi page 17

LED indicator
Refer to the "LED INDICATOR
STATUS" table on page 20.
PF-2 key
Press this key to toggle the function
of the Up/Down keys between
Volume Adjustment mode and
Channel Select mode. Hold this
key for 1 second to activate its
programmable function. The default
setting is [None] (no function).
• For function descriptions and details
on how to change the key functions,
refer to "KEY ASSIGNMENT
MODE" on page 28.
Up/Down keys
Press these keys to adjust the
volume and change the channel.
Press the PF-2 key to toggle the
•
function of the Up/Down keys
between Volume Adjustment mode
and Channel Select mode.
• To change the operating frequency
or QT/DQT settings of a channel,
refer to "CHANNEL SETUP MODE"
on page 22.
Strap hole
Connect a commercially available
strap here.
• When using the belt clip, the strap
hole will be covered and cannot be
used. Instead, use the strap hole of
the belt clip.
Antenna
⑥
⑦
⑧
Microphone
Speaker
⑨
17