JVC KENWOOD PKT-23LF Mode D'emploi page 12

n Charging with the kSC-44CR Charger
1 Plug the AC adapter cable into the jack
located on the bottom of the charger.
2 Plug the AC adapter into an AC outlet.
3 Slide a transceiver equipped with a
battery pack into the charging slot of the
charger.
• Make sure the metal contacts of the
transceiver mate securely with the
charger terminals.
• The LED indicator lights blue.
4 When charging is complete, the
LED indicator turns off. Remove the
transceiver from the charging slot of the
charger.
• It takes approximately 4 hours to
charge the battery pack.
• Transmission is inhibited while
charging.
• When the charger will not be used for a
long time, unplug the AC adapter from
the AC outlet.
12
LED
indicator