Care and Cleaning
□
Before servicing or cleaning the unit, disconnect the power supply at the panel and lock to prevent the power from being turned
on. If the panel cannot be locked, clearly mark the panel with a warning tag to prevent the power from being turned on.
□
Remove the grill by squeezing the springs and pulling the grill down.
□
Wash and clean the grill in a sink and dry with a cloth.
□
Remove dust and dirt from the fan housing with a vacuum cleaner.
□
Dampen a cloth with dish detergent, wipe the fan housing and dry with a cloth.
□
Replace the grill.
□
To reduce the risk of fire, always vent fans to the exterior and in compliance with local codes. Do not vent exhaust air into spaces
within walls, ceilings, attics, crawl spaces, or garages.
□
Unplug or disconnect the appliance from the power supply before servicing.
CAUTION: Do not use solvents, thinner or harsh
chemicals for cleaning the fan..
CAUTION: Do not allow water to enter the motor
CAUTION: Do not immerse resin parts in water over 140°
F (60° C).
10