Safety Precautions; How To Connect Electricity; Use Of Extension Cords - Hotpoint AH11E07D Manuel D'utilisation Et Instructions D'installation

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
prevent property damage, personal injury, or loss of life

SAFETY PRECAUTIONS

Risk of electric shock. Can cause injury or death. For your
safety, the information in this manual must be followed to
minimize the risk of fire, electric shock or personal injury.
with the Installation Instructions before it is used.
receptacle.
supply cord must be replaced with a new power supply cord
obtained from the manufacturer and not repaired. Do not
use a cord that shows cracks or abrasion damage along its
length or at either the plug or connector end.

HOW TO CONNECT ELECTRICITY

WARNING
Risk of electric shock. Can cause injury or death. This
appliance must be properly grounded. Do not, under any
circumstances, cut or remove the third (ground) prong from
the power cord. For personal safety, this appliance must be
properly grounded.
(grounding) wall outlet to minimize the possibility of electric
shock hazard from this appliance.
electrician to make sure the outlet is properly grounded.
and reset button is provided on the plug case. The device
should be tested on a periodic basis by first pressing the
TEST button and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay engaged,
service technician

USE OF EXTENSION CORDS

WARNING
RISK OF FIRE. Could cause serious injury or death.
Conditioner.
READ AND SAVE THESE INSTRUCTIONS
2
.
OFF and unplug your air conditioner before making any
repairs or cleaning.
NOTE:
of this or any other appliance.
must be removed prior to product disposal. If you are getting
rid of an old product with refrigerants, check with the company
handling disposal about what to do.
personal responsibility and obligation to have it replaced
WARNING
Risk of electric shock. Can cause injury or death.
individual electrical outlet which has a voltage rating that
matches the rating plate. This provides the best performance
and also prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
49-5000041 Rev. 5