Resetting Lamp Hours - Pioneer KRF-9000FD Mode D'emploi

5
Replacing the Lamp (Continued)
MENU
ENTER
TEST
WARNING
LAMP
STANDBY/ON
CAUTION
Reset the lamp time only when you
have replaced the lamp.
Never reset it when the lamp is still
in use. Otherwise, the approximate
standard for gauging replacement
time may be inaccurate and lamp
blowout may occur.
40
Troubleshooting

Resetting Lamp Hours

After installing a new lamp unit, reset the lamp hours.
A
B
EXIT
LIGHT
Insert the power plug to the power outlet
STANDBY/ON
Reset lamp hours
Press in the order as shown.
Press each button within 2-second intervals and press the last button for 2
seconds or more.
EXIT ENTER
The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3
seconds. After that, the unit switches to standby mode.
Light on (Red)
HIDE
Press for 2 seconds or more