Pioneer KRF-9000FD Mode D'emploi page 23

Setting Menu
Item values shown in
Items that can be configured differ according to the input signals.
Picture > Picture Adjust
A
Contrast
Adjusts the contrast of the projected image.
(Black) b50 to 50 (White)
B
Brightness
Adjusts the brightness of the projected image.
(Darken) b30 to 30 (Brighten)
C
Color
Adjusts the colour density of the projected image.
(Lighten) b50 to 50 (Darken)
D
Tint
Adjusts the hue of the projected image.
(Red) b30 to 30 (Green)
E
Sharpness
Adjusts the outline of the projected image.
(Soft) b30 to 30 (Sharp)
F
DNR
Adjusts the strength of noise removal of the projected image.
(Weak) 0 to 30 (Strong)
"Contrast", "Brightness", "Color" and "Sharpness" can also be configured from the remote control. (pP10)
"Tint" can only be adjusted when NTSC signals are input to the video or S-video input terminal.
Picture > Color Temp.
G
Color Temp.
Sets the colour temperature of the projected image.
Low
Middle
High
Manual10
Manual20
* The red, green and blue colours can be adjusted and registered respectively.
This setting can also be configured from the remote control. (pP10)
are factory settings.
Select this to give a reddish tinge to the image.
Select this to have a balanced image.
Select this to give a bluish tinge to the image.
(Less red) b255 to 0 (More red)
Red
(Less green) b255 to 0 (More green)
Green
(Less blue) b255 to 0 (More blue)
Blue
(Less red) b255 to 0 (More red)
Red
(Less green) b255 to 0 (More green)
Green
(Less blue) b255 to 0 (More blue)
Blue
ENGLISH
23