Pioneer KRF-9000FD Mode D'emploi page 28

4
Setting Menu (Continued)
Source > Color System
W
Color System
Configures the colour system.
Auto
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
This setting is available only when projecting the video or S-video input.
Source > Black Level
X
Black Level
Configures the black level.
0 %
7.5 %
This setting can only be adjusted when NTSC signals are input to the video or S-video input terminal.
Install1 > Menu Position
Y
Menu Position
Sets the display position of the menu.
Upper left
Upper centre
Upper right
Left centre
Centre
Right centre
Lower left
Lower centre
Lower right
Install1 > Menu Display
Z
Menu Display
Sets the duration for displaying the menu.
15 sec
On
28
Settings
Configures the colour system automatically.
Select this when the colour system is NTSC.
Select this when the colour system is NTSC4.43.
Select this when the colour system is PAL.
Select this when the colour system is PAL-M.
Select this when the colour system is PAL-N.
Select this when the colour system is SECAM.
Select this when the gradation of the dark portions of an image is indistinct with the
7.5 % setting.
Select this when the dark portions of an image appear washed out with the 0 % setting.
Displays menu on the upper left of the screen.
Displays menu on the upper centre of the screen.
Displays menu on the upper right of the screen.
Displays menu on the left centre of the screen.
Displays menu on the centre of the screen.
Displays menu on the right centre of the screen.
Displays menu on the lower left of the screen.
Displays menu on the lower centre of the screen.
Displays menu on the lower right of the screen.
Displays for 15 seconds.
Always display.