Technical Data - Kayoba 018720 Mode D'emploi

Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Run time:
Driving speed:
Size:
Battery, car:
Charging time:
Range:
Battery, remote control:
DESCRIPTION
Rechargeable cross-country car with two-wheel
drive. The car is charged with the supplied
USB cable. The car is controlled with a hand
controller that runs on two AA batteries (sold
separately).
PACKAGE CONTENTS
1. Radio controlled car
2. Remote control
3. Battery
4. USB charging cord
5. Screwdriver
6. Instructions
FIG. 1
RADIO CONTROLLED CAR
1. Battery cover
2. Knob for drift correction
3. Screw
4. Power switch
FIG. 2
70 min
8 km/h
29 x 17 x 14 cm
lithium-ion 3.7 V
2.5 hours
20 m
1.5 V R06 (AA)
REMOTE CONTROL
1. Power switch
2. Drive stick (forwards/backwards)
3. Steering stick (left/right)
4. Lights On/Off
5. Auto mode
FIG. 3
ASSEMBLY
INSERTING THE BATTERIES
Radio controlled car
1. Unscrew and open the battery cover.
2. Connect the battery terminals to the
battery compartment cord and put the
battery in the compartment.
3. Replace the battery cover and screw tight.
FIG. 4
Switch off the power switch and remove the
battery if the car is not going to be used for
some time.
Remote control
2 x 1.5 V batteries size R06 (AA) (sold
separately)
1. Unscrew and open the battery cover.
2. Insert 2 batteries of size R06 with the
correct polarity.
3. Replace the battery cover and screw tight.
FIG. 5
Switch off the power switch and remove the
battery if the remote control is not going to
be used for some time.
Charging
1. Put the USB charging cable in the USB
port on a computer, a powerbank or USB
adapter (5 V, 0.5–2.0 A).
EN
19