FONESTAR SM-2703UB Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

11.- REC: line level output, 2 x RCA connectors. For recording applications.
12.- AUX: unbalanced signal output of AUX bus, 6.3 mm jack connector.
13.- EFFECT: unbalanced signal output of EFF bus, 6.3 mm jack connector.
14.- CH 7/L - CH 7/R: unbalanced line inputs with 6.3 mm jack connectors for the
left (L) and right (R) channel of the stereo image.
15.- GAIN: channel CH 7 and the BT/USB/MP3 player input signal gain control.
16.- USB storage device connection port.
17.- Headphone output, 6.3 mm jack connector.
18.- BT/USB/MP3 player module information display.
19.- MAIN (L, R): unbalanced line level output, 2 x 6.3 mm jack
connectors. The output signal is the final mix.
20.- Controls for the playback of files contained in the USB storage
device. For more information, consult the MP3 Operating module
section.
21.- POWER: mixer LED power indicator. It lights up in red when the
mixer is connected to the power supply.
22.- PHANTOM +48 V: +48 V phantom power supply selector to power
the condenser microphones. The phantom power supply is activated
in the channels CH 1 to CH 6 at the same time. The LED indicator
lights up red when the switch is activated.
23.- LED indicators of the MAIN output signal level (L, R).
24.- REPEAT: control to adjust the number of repetitions of the effect.
25.- DELAY: control to adjust the time interval between the effect
repetitions.
26.- Headphone output volume control.
27.- FADER: sliding volume control. Adjusts the signal level of the final
mix output (MAIN).
28.- AUX: AUX output level control.
29.- EFF: EFF output level control.
- 3 -
EN

Publicité

Table des Matières
loading

Table des Matières