Table des Matières
Publicité
12
Routine Maintenance
IMPORTANT:
the diamond tool and relative attachment system must always be
maintained in perfect working order.
It is dangerous to use excessively worn or out-of-round tools, or tools
showing microfissures on the diamond coated cutting edge.
If the diamond tool becomes worn and fails to cut, it should be fressed
using the special MONTOLIT dressing tool art. 395.
13
During prolonged periods of disuse
•
Remove the diamond cutting tool and place it in its box.
•
Routine maintenance the machine and place it in its box.
•
Store in a dry place.
14
Disassembly of the machine
15
Fittings
•
•
16
OPTIONALS
•
•
•
•
2 (two) years from date of sale (delivery note/receipt or invoice). Any malfunctions caused by inappropriate
or incorrect use of the machine will not be covered under the warranty.
BREVETTI MONTOLIT has always employed and supplied top quality materials and products. Our professional
commitment to our customers places us well above the common standard. We take great pride in the safety and
reliability of our products. Commitment to quality is not just an idle boast-our products are covered by full written
warranties. In fact, we insure all our products against accidental damage due to manufacturing defects and poor
workmanship after sale and delivery.
Descriptions and illustrations are purely indicative. Without prejudice to the essential features of the models described and illustrated herein, the
Company reserves all rights at any time, and without notice, to make product changes considered necessary for improvement or required in the interest
of pro-duct engineering and sale.
The machine is supplied with a 24 mm. fork spanner and a special tool for cutter
fitting/removal.
The art. 915c is supplied with two 24 mm. fork spanner.
Spindle with M 16 fitting.
Spindle with 1/2 gas fitting.
Spindle with W 5/8 fitting.
WARRANTY
®
art. 395
ELETTROMONTOLIT
REALE
MUTUA
Publicité
Table des Matières
