Cleaning And Maintenance - May Way PS-2010 L Notice D'installation Et D'emploi

CLEANING AND MAINTENANCE

ATTENTION! The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps
longer useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device
from electricity. Always switch off the main feeder to the device. Stainless parts wash with cleaning cloth and
detergent without groove parts than dry it by the cloth. Do not use abrasive and corrosive detergents.
Important:
Regular maintenance done by customer includes regulation of yoke that assures stabilization of top working
surfaces in open position. You can regulate the yoke with the key (part of the delivery) after removing stainless
cover on the back side of the device. The cover covers shaft and yokes. Regulation is done by tighten or loosen
the screw of the yoke. Eased yoke cause insuffi ciant aretation of the top surfaces in open position and in the
contrary tight yoke cause extrem resistance which can cause deformation of lengwise holders - hold top working
surfaces. You must do this regulation regularly at about once in three weeks.
WHAT TO DO IN CASE OF BREAK-DOWN
Switch off the electric feeder and call seller´s professional service.
INDICATION
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
instructions - by qualifi ed worker, in confi rmity with standards and when somebody handled incompetently the
device (interventions into inner equipment) or the device was operated by nonqualifi ed staff or at variance with
instructions for use. Guarantee does not also cover the damages caused due to infl uance of nature or other
outer intervention.
6