Instruction For Use - May Way PS-2010 L Notice D'installation Et D'emploi

• safety fuse of the feeder and inner mains can stand the loading of the device (see label of the matrix)
• mains are equipped with effective grounding according to standards (ČSN) and conditions given by law
• socket or switch of the feed is well accessible from device
We refuse any responsibility in case of not respecting above mentioned rules. Before the fi rst use it is necessary
to remove all the protection foil and to clean the device - see chapter „cleaning and maintenance".
BEFORE THE FIRST USE it is necessary to remove all the protection foil and to clean the device - see chapter
„cleaning and maintenance". It is recommended to leave it function empty at the max. power for 15-20 min while
keeping the room as well ventilated as possible.

INSTRUCTION FOR USE

Switch on by main switch (A), turn the knob (D) and adjust required performance. Pilot lamps (B) and (C) will
light. Pilot lamp (B) indicates operation of the device and pilot lamp (C) lights when the heating spirals are on.
Pilot lamp (C) goes out when the device reaches adjusted temperature. Switch the device off by turning the
knob (A) into position „0" and switch off the main switch (D).
A
B
D
C
5