Nicols BP 230 Manuel D'utilisation page 14

User manual BP 230
1.4 INSTALLATION
The projector can be installed on the floor resting on special rubber feet ,on the truss or the wall.
WARNING :With the exception of then the projector is positioned on the floor,the safety cablemust be
fitted.
This must be securely fixed to the support of the projector and then connected to the fixing point at the
center of the base.
Please ensure that the device is always connected to the earth properly
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Always ensure that th e unit is frimly fixed to avoid vibration and slipping while operating. The structure
to which you are attaching the unit should be able to support 10 times the weight of the unit. Also
always use a safety cable than can hold 12 times the weight of the unti when installing the fixture. The
quipment must be fixed by professionals.
Concerning rigging, trussing for this device, please follow the European and national guidelines.
1.5 Connexion DMX 512
14