Technical Specifications - Niko 199-00200 Guide Rapide

199-00200
READ THE COMPLETE MANUAL BEFORE ATTEMPTING INSTALLATION AND ACTIVATING THE SYSTEM.
1. DESCRIPTION
- The single Niko Mysterious touchless control (24V) controls remote switches (teleruptors) and home automation systems.
For controlling a Nikobus home automation system, the interface for push buttons (05-056 or 05-058) can be used.
- If someone or something comes within 50cm in a straight line of the Niko Mysterious touchless control, the control recognizes this and the orientation lighting on the switch burns brighter. The operation itself occurs at a
distance of maximum 10cm.
- Only for mounting in a flush mounting system for brickwork (199-00096) or for gyproc walls (199-00097).
- Wiring diagrams: see enclosure.
2. REMARKS CONCERNING INSTALLATION
- When connected to the mains, the wave control will first calibrate. The control zone should not be activated for 3 minutes. The wave control will not function during calibration.
- Make sure that the Niko Mysterious touchless control is not inadvertently activated by fluttering curtains, for example. Do not position the control in the vicinity of moving objects.
- The control is always installed singly. When installing more than one Niko Mysterious function, a centre distance of minimum 120mm is required. When installing 2 Niko Mysterious touchless controls, a centre distance of
minimum 300mm is recommended.
- Make sure that there is sufficient space around the sensors. Do not place any objects directly in front of the control.
- The sensors work with optical technology. If the Niko Mysterious touchless control is installed with a veneer finish, you must take reflections into account. Rule of thumb: the darker the edge of the veneer finish, the less
chance there is of reflection, and therefore the better the operation of the control.
- The sensors are positioned behind the black ring, which may not be painted. Make sure that this ring remains free of dirt or finger prints.
- Paint or wallpaper the central plate with care as not to hinder the visibility of the sensors.
- To ensure optimal operation, do not position the Niko Mysterious touchless control in direct sun or artificial light.
- The attachment of the central plate occurs by way of a bayonet closure (see drawing).

3. TECHNICAL SPECIFICATIONS

If you are working with a remote switch, then connect the control to 24V AC via a short-circuit resistant safety transformer.
use of 24V for touchless control
remote switch 24V~ via short circuit proof
(AC current)
other systems
(DC current)
Current consumption of the LED = 100mW
Infra-red radiation. Do not view directly with optical instruments.
24V Niko Mysterious touchless control with LED
for screwing finishings
4. LEGAL WARNINGS
- The installation has to be carried out by a registered installer and in compliance with the statutory regulations.
- This user manual has to be handed over to the user. It has to be included in the electrical installation file and has to be passed on to any new owners. Additional copies are available on the Niko website or via the support service.
- During installation, the following has to be taken into account (not limited to list below):
- The statutory laws, standards and regulations;
- The state of the art technique at the moment of installation;
- This user manual, which must be read within the scope of each specific installation, only states general regulations;
- The rules of proper workmanship
- In case of questions, you can consult Niko's support service or contact a registered control organisation.
Support Belgium: Support UK:
+32 3 778 90 80 +44 1525877707
website : http://www.niko.be http://www.nikouk.com
e-mail: support@niko.be sales@nikouk.com
In case of a defect, you can return your product to a registered Niko wholesaler, together with a clear description of your complaint (Conditions of use, stated defect...).
5. GUARANTEE PROVISIONS
- Period of guarantee: 2 years from date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there is no invoice, the date of production applies.
- The consumer is obliged to inform Niko in writing about the defect, within two months after stating the defect.
- In case of a failure to conform, the consumer has the right to a repair or replacement (decided by Niko) free of charge.
- Niko cannot be held liable for a defect or damage as a result of an incorrect installation, improper or careless use or wrong usage or transformation of the goods.
- The compulsory regulations of the national legislation concerning the sales of consumer goods and the protection of the consumers in the countries where Niko sells, directly or via sister or daughter companies, chain stores,
distributors, agents or permanent sales representatives, take priority over the rules and regulations mentioned above.
nv Niko sa
PM199-00200R10262.indd 4
max. switching capacity
max. 25VA
safety transformer
0 - 24V DC 1A
24V
25VA
µ
199-00200
MOUNTING
Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@Niko.be — www.niko.be
signaling cable
8/10/12/14/16/20
min. 0,5mm - max. 0,8mm
wiring diagram
24V
24V
DISMANTLING
PM199-00200R10262
13-09-2010 08:20:17