Electronic Device Connections And Functions; Stereo Cautions - Sundance Spas 680 Serie Manuel D'utilisation

680 EXPORT SERIES
19.1

Electronic Device Connections and Functions

A. Connecting Your Auxiliary Device Using the 3.5 mm Cable
(purchased separately):
1. Plug one end of the cable to "Aux" connection on
the stereo, Figure A.
2. Plug the other end of the cable into the headphone
jack connection on the Auxiliary device.
3. When the stereo detects an audio signal from the
Auxiliary device it will begin to play. All operations
are conducted via the Auxiliary device.
Note: The Bluetooth feature will override the Auxiliary feature
if the stereo detects a Bluetooth connection. To resume the Auxiliary
feature the Bluetooth device must be turned off.
CAUTION
EQUIPMENT DAMAGE!
Never install, remove or operate any electrical device (e.g.
AUX/Bluetooth) while hands are wet or while sitting partially
or fully immersed in the spa!
B. Connecting Your Bluetooth Device:
1. Turn power ON to the stereo unit.
2. From your Bluetooth device, make sure the Bluetooth setting is ON.
3. Follow the pairing instructions for your Bluetooth device and connect
to the "BLUEWAVE" device that appears on your screen.
4. If asked for a password, enter the code "0000."
5. All operations are conducted via the Bluetooth device.
19.2

Stereo Cautions

1. "CAUTION - Risk of Electric Shock. Do not
leave compartment door open."
2. "CAUTION - Risk of Electric Shock. Replace
components only with identical components."
3. "Do not operate the audio/video controls while inside in the spa."
4. "WARNING - Risk of Electrocution. Do not connect any auxiliary
components (for example cables, additional speakers, headphones,
additional audio/video components, etc.) to the system."
Page 52
:
RISK OF ELECTRICAL SHOCK OR
AUX
Figure A
DANGER
!
RISK OF SHOCK OR
ELECTROCUTION!