• Position the appliance far from other sources of heat, inflammable materials (curtains, carpets,
etc.), inflammable gases or explosive materials (spray cans) and from materials that can deform
on exposure to heat. Make sure that there is 120 cm of free space in front of the appliance and
50 cm on the sides.
• Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane (the
appliance could upset). Make sure the safety system get in touch with the floor, otherwise the
appliance doesn't work.
• Make sure that the cable is correctly positioned, that it is not touching hot elements or sharp
edges, is not wound around the utensil, is not twisted up on itself or in the way to prevent the
utensil from being pulled over. Check that you cannot trip over to prevent accidental falls or harm
to persons.
• All repairs should be made by a competent qualified electrician. In any case you should return the
appliance to this service.
DESCRIPTION OF THE APPLIANCE
Frontal part:
⇔ Switch for swinging
⇔ Lower candle switch
⇔ Upper candle switch
⇔ Switch 0-I central
candle
1. Protection grill
2. Support
Inferior part:
3. Wing nut screws
4. Anti-upsetting system
5. Cable slideway
6. Cable
13