5 MOUNTING
12
–
Route the cable downward to the plug.
–
Join plug-in connector
500712-01
–
Mount chain adjuster
adjuster is in contact with the adjusting screw.
–
Mount and tighten original nut
Guideline
Condition
In order for the rear wheel to be correctly aligned, the
markings on the chain adjuster must be in the same posi-
tion relative to the reference markings.
Nut, rear wheel
500713-01
spindle
Final steps
–
Mount the front rider's seat (see Owner's Manual).
–
Mount the passenger seat (see Owner's Manual).
–
Remove the motorcycle from the lifting gear at the rear (see
Owner's Manual).
cs
and secure with a cable tie.
bp
(included) and ensure that the chain
ct
.
M25x1.5
90 Nm (66.4 lbf ft)