Cut To Edge; Cutting Height - Worx LANDROID WR140 Manuel Du Propriétaire

EN
How Landroid works
In more extreme weather...
In case of a lightning storm, protect Landroid by unplugging the charging base, disconnecting the boundary wire, and making sure
Landroid is not allowed to charge. In the Winter and especially in case of very cold weather and snow, we recommend you store
your Landroid inside.
No more grass clippings to collect
Landroid's daily mowing produces very short clippings that don't need to be raked. These clippings are a perfect organic nutrient
for your lawn. Frequent mowing boosts the density of grass blades and effectively prevents the propagation of weeds.

Cut to edge

Landroid M and L models have a cut to edge feature. The special offset blade gets as close as possible to the border of your lawn,
leaving you little trimming to do.

Cutting Height

Landroid M's cutting height can be adjusted between 1.9"- 3.5" at 0.4" steps.
Landroid L's cutting height can be adjusted between 1.6"- 3.9" at 0.4" steps. Landroid L's blade disc can be assembled in two ways
as per the grass height. The original cutting height can be adjusted from 1.6" to 3.1". When turning over the Blade disc assembly, the
cutting height can be adjusted from 2.4" to 3.9" with the blades on the bottom side of the blade disc.
Before starting your Landroid for the first time, make sure your grass is no longer than 4". If longer, use a regular mower to cut it
before operating Landroid. If you want to drastically shorten the height of your grass, it is recommended that you do so progressively,
by adjusting the cutting height in steps.
Security & PIN Protection
To prevent unauthorised people from being able to use it, Landroid is protected by a PIN code that you can easily set up. If
Landroid is connected to your Wi-Fi network, you can lock it on your smartphone through the app. If additional security is required,
we even have a Find my Landroid option which allows you to track your Landroid via a built in pre-paid SIM.
11