Setting The Timer - TECO SEACHILL TK 5K Manuel D'instructions

TANK
5.3 THERMOSTAT OPERATION AND ADJUSTMENT
ON / OFF: The switch turns the machine on or off .
Starting time
Run down time
Setting the clock
Temperature adjustment
Parameter screening menu
Method of operating
Flow light lit: Correct water fl ow
Computer light on: Unit operating
Computer light off : Unit paused
5.3.1 METHOD OF OPERATING
The button "MODE" allows for the choice of the machine's operating mode.
To choose the operating mode, press button "MODE" until the corresponding LED lights up.
• AUTO: Automatic cooling and heating mode. Maintains the water temperature constant whether by heating
or cooling (+ or - 2°C).
• HEAT: Heating mode. maintains the water temperature equal or higher than the set temperature (+ or – 2°C)
• COOL: Cooling mode. Maintains the water temperature equal or lower than the set temperature (+ or – 2°C)
NOTE: When the operating mode is changed, verify the water temperature setting.
5.3.2 SETTING OF WATER TEMPERATURE
• press button
• enter the SET temperature using keys
seconds
NOTE: A value between 5°C (41°F) and 40°C (104°F) may be entered for the water temperature.
5.3.3 BLOCKING THE KEYBOARD
It is possible to block / unblock the thermostat keyboard by pressing keys
few seconds. The thermostat will emit a sound signal when blocked / unblocked.
5.3.4 SETTING THE CLOCK
In order to set the clock:
• press button
• press button
buttons and
• press button
buttons and
5.3.5

SETTING THE TIMER:

To set the timer when TURNED ON:
• Press button
C H I L L E R L I N E
, the number "1" will appear on the display followed by the SET temperature value
. The display will start to fl ash the time set
a second time. The display will start to fl ash the value of the hour set. Set the value using
.
a third time. The display will start to fl ash the value of the minutes set. Set the value using
. The display will start to fl ash the time set
and . The value will automatically be saved after a few
EN
and simultaneously for a
15