Aligning The Panel - Dacor DRR24 Serie Instructions D'installation

16. Aligning the Panel

There are two panel-adjustment mechanisms at the top and two at the bottom of the door.
Adjust the panel so it aligns with the surrounding cabinetry.
The gap between the cabinet and the panel must be:
• 1/8" (3 mm) on top
• 1/8" (3 mm) on the side for single installation
• 3/16" (4 mm) on the side for pair installation
1/8" 1/8"
1/8" 1/8" 3/16" 3/16" 3/16"
Top of the Door
1. Use the double-threaded bolts to align the door panel.
2. Engage a side screw (see the graphic) to shift the panel side to side.
3. Engage Screw 1 (see the graphic) to shift the panel forward/backward; engage Screw 2
to set the panel in place.
English 47
Dacor_OneDoor_BRR9000M_IM_DA68-03621B-02_EN.indd 47 2017-03-20 4:13:06