LEGRAND 608 65 Mode D'emploi page 17

Table des Matières

Publicité

Maintenance (continued)
10
Important :
According to European directive 91/157/EEC of 18 March 1991, the batteries used in this unit, which
contain cadmium, may be harmful to the environment.
Used units and batteries can be returned to approved Legrand distributors.
Refitting the batteries
15
14
- After reassembly, if repairs have been carried out correctly, the LEDs indicate either :
- system not ready (green/orange LEDs flashing). Wait until the unit is in re-charging mode.
- or batteries recharging (green LED flashing).
- Check operation : when only the green LED is flashing, press the test button.
- A standby power test will be scheduled automatically for 24 hours later (by which time the batteries will be
sufficiently recharged).
- If the test is correct, the green LED flashes (during recharging), and is then illuminated continuously.
Important :
For special functions where the test time has been imposed, the unit should be reprogrammed
(see choosing the test time).
11
10
10
15
15
10
12
13
Note : Whenever the batteries are replaced,
write the new date of first use on the back of
the unit.
23
12
12

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

608 66

Table des Matières