Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14.4.2
Power Mode (W3500, S-Line 3500)
• Press the function key 4. The preset power stage "8" is selected and the device turns
on. With the + / - Keys (5+6), you can change the settings at any time in a range from
1 – 12.
Please note
► We recommend to select the function "Power Mode" in case of steaming food or
boiling water for example. So the overheating protection "E05" will not be activated.
14.4.3
Temperature Mode
• Press the Function Key 3. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and
240°C).
• Please note that the two functions of level and temperature can be chosen as
alternative . You can either work with the power levels or with the temperature
stages. The most recently selected function is active.
• The temperature is measured by a sensor below the glass ceramic plate, therefore
the displayed temperature can deviate from the temperature in the pot.
Please note
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than 160°C.
► When one hotplate works with 180-240°C then the other hotplate cannot work with
more than level 10.
14.4.4
Powersharing Mode (W3500, S-Line 3500)
• If both induction fields are operated, the boards will share over power sharing
function levels as follows:
left
12
11
right
5
6
14.4.5
Timer
• Timer Function. Press the button Timer 2.
• With the +/- keys, you can now select the operating time in 1-minute intervals (up to
max. 180 minutes).
caso W3500 / S-LINE 3500 / Pro Menu 3500
10
9
8
7
6
7
8
9
10
11
5
4
3
2
1
12
12
12
12
12
43
Publicité
Table des Matières
