Gartenmeister 95 88 11 Mode D'emploi page 5

Intended Use
The pulse sprinkler is intended for irrigation of areas with clear water. It is not
suitable for the application of pesticides or fertilizers.
Installation and Operation
 Set up the pulse sprinkler at the desired location and connect it to a water
source with sufficient pressure, such as the water supply network, using a
hose and the water connection (5).
 Regulate the swivel range of the sprinkler with the stops (4). If you want to
operate the sprinkler in a full circle, fold the stop bracket (3) upwards.
 Regulate the throw and jet shape with the deflector plate (1) and the jet
disturbance screw (2). The throw also depends on the available water
pressure.
 Switch on the water supply and readjust the throw if necessary.
Storage and cleaning
 Store the pulse sprinkler in a dry, frost-proof place. Freezing residual water
can destroy the device.
 Do not use any aggressive chemicals or abrasive cleaners to clean the device
in order not to damage the surfaces.
Technical Data
Irrigation diameter:
Irrigation area:
Rotation angle:
Operating pressure:
Water connection:
Operation
approx. 20 m)
approx. 315 m2
30 - 270 °
2 - 8 bar
½"connector
5