GE Profile PDW7900PBB Manuel Du Propriétaire page 11

Loading place settings...
Follow these guidelines for loading 10 place settings. Features and appearance of racks and silverware baskets
may vary from your model. NOTE: Silverware should be individually loaded into the slots on the silverware basket lid.
Upper Rack—10 place settings
Follow these guidelines for loading 12 place settings. Features and appearance of racks and silverware baskets
may vary from your model. NOTE: Silverware should be individually loaded into the slots on the silverware basket lid.
Upper Rack—12 place settings
Caring for the dishwasher.
Cleaning the Exterior Door Panel
Before cleaning the front panel, make
sure you know what type of panel you have.
Refer to the last two letters of your model
number. You can locate your model number
on the left-hand tub wall just inside the door.
If your model number ends with BB, CC, WW,
SA or BG, then you have a painted door
panel. If your model number ends with SS,
then you have a Stainless Steel Door panel. If
your model number ends with CS, then you
have a CleanSteel panel.
Follow the instructions below for cleaning the
door panel for your specific model.
Painted Door Panel (model numbers ending
in BB–black, CC–bisque, WW–white, SA–silver
metallic or BG–graphite black)
Use a clean, soft, lightly dampened cloth,
then dry thoroughly. You may also use a
good appliance wax or polish.
Lower Rack—10 place settings
Lower Rack—12 place settings
Stainless Steel Door Panel (model numbers
ending in SS)
The stainless steel panels can be cleaned
with Stainless Steel Magic or a similar product
using a clean, soft cloth. Do not use appliance
wax, polish, bleach or products containing
chlorine on Stainless Steel doors.
You can order Stainless Steel Magic
#WX10X15 through GE Parts by calling
800.626.2002.
CleanSteel Door Panel (model numbers
ending in CS)
Use a clean, soft, lightly dampened cloth,
then dry thoroughly. Do not use appliance
wax, polish or any chemical agent on
CleanSteel doors.
Do not wipe the dishwasher with a soiled
dish cloth or wet towel. These may leave
a residue. Do not use scouring pads or
powdered cleaners because these products
can scratch the finish.
ge.com
11