Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connect the fixture wires to the wires in the junction box.
Twist the wires together and secure with wire connectors.
Recommended Grounding Method
Use a green ground "pigtail" (not provided) and twist
one end together with the bare fixture wire and the box
ground wire. Secure with a wire connector. Secure the
other end of the "pigtail" with the GND screw on the
mounting plate.
If you have metal junction box, you may not need the green
"pigtail". If you are unsure about the grounding method,
consult your local building code.
1. Make sure wire connectors and wires are inside the
2. Slide the fixture assembly onto the mounting screws.
3. Caulk around fixture base with silicone weather sealant.
White to white
Black to black
4
MOUNTING THE LIGHT FIXTURE
junction box.
Tighten decorative nuts removed in step 1 of Light
Fixture Installation section securely against fixture base.
Decorative Nut
Caulking Around Fixture Base
Mounting Screw
Junction
Box
Publicité
Chapitres
Table des Matières
Dépannage
