Building In - Asko ODV8128G Mode D'emploi

INSTALLATION

Building in

EN 12
min. 550
560-568
590
1. Put the plug of the device in a grounded wall socket.
Slide the appliance in the kitchen cupboard opening. Check
whether the casing fits correctly.
2. Screw the drawer securely to the cupboard at the left and right front
using the 4 screws supplied.
3. Slide the decorative strips over the draw profiles on the left and
right, starting from the top (ODV8128G only).
Note! When sliding out the drawer, it can tip forward if it is not
securely screwed to the kitchen cupboard.
450
550
556
141
597
425
135