Getting To Know Your Charger - Optima Digital 400 Guide De L'utilisateur

Getting to Know your Charger

This section of the manual is designed to give you a complete understanding of the features,
functions and operation of your OPTIMA ® Digital 400.
1
2
6
13
Digital 400
Getting to Know your Charger
Feature
1. LED/LCD Battery Charging Gauge
2. Quick Set Charging Selector
3. On Unit Cord Storage
4. AC Power Plug
3
5. DC Charging Clamps
6. DC Charging Ring Terminals
7. Hood Latch Hook and Kickstand
4
8. Wall Bracket*
*Wall bracket must be installed securely, either to a stud in the wall or using appropriate anchor fasteners for
the wall the bracket is installed on. Damage due to improper installation is not covered under warranty.
5
7
8
Digital 400
Function
LCD display for charging, maintaining, and fault mode indication.
Gauge displays battery charging (fill) rate with charger mode and
fault messages. See pages 21-24.
Quick and easy selection of charge profiles by battery type.
(Engine starting, deep cycle, auto/marine and motorcycle).
See page 17.
Stores AC and DC cables when not in use.
Do not alter.
Red (+) and gray (-) heavy duty battery clamps.
Interchangable DC ring terminals for permanent installation. Additional
sets available as an option.
This convenient hook allows the unit to hang from a hood latch
or other vehicle hardware or as a "kickstand" on a hard flat surface.
Convenient wall bracket for storage or location near vehicle.
Provides additional storage for all cables.
14