Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
E
LAMINATOR CONTROLS
A
On / off switch
B
Standby button & LED
C
Pouch selection buttons (
D
Release lever (
E
Carry handle
CAPABILITIES
Performance
Entry width
Pouch thickness (min)
Pouch thickness (max)
Warm up time (estimate)
Cool down time
Lamination speed (+/- 5%)
Number of rollers
Ready indication
Release lever
Clear Path / Anti-jam engine
Cold lamination
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
FEATURES & TIPS
'Safe Start' function
When switched on, the machine has a default 'Safe Start' function which is
set to the cold pouch setting. You may select other hot temperature settings if
required. The machine will warm-up and alert the user when it is ready.
'Release' function
To remove or re-align a pouch during lamination, activate the release lever
located at the rear of the machine. The pouch can only be removed from the
entry slot when the lever is activated.
•
For best results, use Fellowes ® brand pouches:
3 Mil, 4 Mil, 5 Mil and 5 Mil Cold Pouches.
•
For self-adhesive (cold pouches) only use the cold setting.
•
This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
4
, 3 Mil, 4 Mil, 5 Mil)
)
125 = 12.5" / 318mm
95 = 9.5" / 240mm
3 Mil (per side)
5 Mil (per side)
5-6 minutes
60-90 minutes
approx. 12"/min (fixed speed)
2
Light & beep
Yes
Yes
Yes
F
Pouch / document entry slot
G
Entry support shelf
H
Pouch / document exit
I
Cooling system vents
Technical Data
Voltage / Frequency / Current(Amps)
Wattage
Dimensions (HxWxD)
Net weight
Max document thickness
(laminating capacity)
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
•
Always put the item to be laminated into the appropriate sized pouch.
•
Always test laminate with a similar size and thickness before final process.
•
Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
•
If required, trim excess material from around the item after lamination and
cooling.
•
When working with different pouch thickness' (temperature settings) it is
recommended to first start with the thinnest pouches.
125 = 110-120V AC, 60Hz, 4.2A
95 = 110-120V AC, 60Hz, 3.5A
125 = 480 Watts
95 = 430 Watts
125 = 4.3" x 22.4" x 6.1"
95 = 4.3" x 17.7" x 5.7"
125 = 4.4lb
95 = 3.7lb
.040" / 1 mm
Publicité
Table des Matières
