SPORTSTECH WBXs Serie Manuel D'utilisation page 31

On the water:
1.The standard upright position is with the feet in the direction of motion
underneath the carrying handle.
2. Always hold the paddle firmly.
3. Balance is akin to riding a bike: the greater the speed, the more stable the
board will be.
4.The flexible fin is capable of sustaining ground contact. Nevertheless,
damage may occur at higher speeds or in contact with a sharp ground.
EN
Disassembly:
1. Disassemble the fin.
2. Clean and inspect your WBXs250/320/368 as well as the accessories (including
paddle) after each use. Rinse everything to make sure any kind of residue or
salt residue (when used in salt water) is removed. Use mild soapsuds or
fresh water
IMPORTANT: Do not use detergents or silicone-based cleaners!
3. Make sure the valve and the valve environment are free from water and
dirt before removing the safety cap.
4. Open the valve cover and turn the PIN 90 degrees clockwise so that it is in
the lowered position and the air can escape.
5. Insert your WBXs250/320/368 board from the opposite side of the valve with
the inside deck and the fins on the outside.
6. Fix the WBXs250/320/368 with the included strap before packing. So it can be
conveniently stowed in the included bag and unpacked later.
31