Assembly Instructions - SPORTSTECH WBXs Serie Manuel D'utilisation

5. ASSEMBLY INSTRUCTIONS

1.Place the WBXs250/320 in a completely free space and make sure
that there are no sharp and hot objects on the ground when rolling out
2.Check whether the valve is closed. For this, the PIN must be in the
upper position at the height of the black ring. If this is not the case, turn
the PIN 90 degrees counterclockwise.
3. Check if the valve is free from contamination.
4. Connect the hose of the supplied pump with sealing ring to the
valve and snap it into place by turning the pump neck clockwise.
5.Pump up your WBXs250/320/368 with the supplied hand pump (it is best to fix the pump
with both feet). Optionally, a suitable electric pump can be used.
WARNING: Do not use a compressor! By using a compressor, the SUP board canbe damaged,
all warranty claims expire when using a compressor. Never exceed the maximum pressure of 18
psi.
28