Initial Operation - Winix ZERO-N Manuel D'utilisation

INITIAL OPERATION

Insert the power cord into an electrical
①
outlet.
Press the 'Power' button.
②
NOTE
③ By default, when the unit first powers on,
the mode will be set to Auto enabled.
ˍ When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
NOTE
English
ˍ During the first 30 seconds of power up, the Air Quality
Indicator will cycle through Blue, Amber and Red colors. The
Particle Sensors take approximately 30 seconds to gauge the
air quality in the environment, after which normal operation
will begin.
ˍ In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ When the unit is running, you may hear a chirping or buzzing
sound.
ZERO-N
11