Maintenance; Clean The Upper Filter Screen Frame - ICEluxe P14 Serie Manuel De L'utilisateur

Masquer les pouces Voir aussi pour P14 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance

Cleaning: before cleaning and maintenance, turn off the machine and unplug the plug.
1. Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as benzene,
alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will be damaged or even
the whole machine will be damaged.
2. Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is reduced,
be sure to clean the filter screen once every two weeks.

2.1 Clean the upper filter screen frame

1) Clasp the wedging block of the EVA filter screen frame with hands. Force down from the
outside to remove the EVA filter screen frame. Unscrew four screws fixing the EVA filter
screen and the rear housing to remove the EVA filter screen (as shown in the above figure) .
2) Put the EVA filter screen into warm water with neutral detergent (about 40 / 104 ) and dry
it in the shade after rinsing clean.
Unit Storage:
1. Unscrew the drainage cover, unplug the water plug, and discharge the water in the water
pan into other water containers or directly tilt the body to discharge the water into other con-
tainers.
2. Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the
drainage pipe becomes dry, so as to keep the inside of the body in a dry state and prevent it
from mildewing.
3. Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
post; install the water plug and the drainage cover.
4. Remove the exhaust pipe and keep it properly.
5. Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it
out of the reach of children, and take dust control measures.
6. Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components properly.
26

Publicité

Table des Matières
loading

Table des Matières