Step 4. Install The Anti-Tip Device - Samsung NX58F5700WS Manuel D'installation

Step 4. Install the anti-tip device

To reduce the risk of tipping, the appliance must be secured by properly
installing the anti-tip device packed with the appliance.
WARNING
• All ranges can tip, resulting in personal injury.
• A child or adult can tip the range and be killed.
• Install anti-tip device to range and/or structure per installation
• Engage the range to the anti-tip device installed to the structure.
• Re-engage anti-tip device if range is moved.
• Failure to follow these instructions can result in death or serious burns to
An anti-tip bracket and screws,
installation instructions, and template
are shipped with every range (PN
DG94-00870B). The instructions include
information necessary to complete the
installation of the anti-tip bracket. Read
and follow the instructions on the sheet
and use the template for anti-tip bracket
installation. If not properly installed, the
range could be tipped by you or a child
standing, sitting, or leaning on an open
oven door.
To install an anti-tip bracket, release and extend the leveling leg to a
minimum clearance of 21/32 in (16.5 mm) between the range bottom and
the floor.
To check if the bracket is installed and engaged properly, remove the warming
drawer or storage drawer and look underneath the range to see that the leveling
leg is engaged in the bracket. Carefully tip the range forward. The bracket should
stop the range within 4 inches (10.2 cm) of tipping. If it does not, the bracket
must be reinstalled.
If the range is pulled from the wall for any reason, always repeat this procedure
to verify the range is properly secured by the anti-tip bracket. Never completely
remove the leveling legs or the range will not be secured to the anti-tip device
properly.
130521_(Install)_NX58F5700WS_DG68-00518A_EN+CFR.indb 31
instructions.
children or adults.
installation instructions _31
04/06/2013 17:45:50