Samsung NX58F5700WS Manuel D'installation page 26

Usage situations where appliance power cord will be
disconnected frequently
Do not use an adapter plug in these situations because disconnecting of the
power cord places undue strain on the adapter and leads to eventual failure
of the adapter ground terminal. Where a standard two-prong wall receptacle
is encountered, it is the personal responsibility and obligation of the customer
to have it replaced with a three-prong (grounding) receptacle by a qualified
electrician before using the appliance.
Additional installation requirements for mobile homes
The installation of appliances designed for mobile home installation must conform
with the Manufactured Home Construction and Safety Standard, Title 24 CFR,
Part 3280 (formerly the Federal Standard for Mobile Home Construction and
Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the
Standard for Manufactured Home Installations, latest edition (Manufactured
Home Sites, Communities and Set-Ups), ANSI A225.1, latest edition, or with
local codes. In Canada, mobile home installation must be in accordance with the
current CAN/CSA Z240/MH Mobile Home Installation Code.
Power cord location
The power cord for this appliance is located
on the back of the range, near the bottom
right hand corner. The 59-in (150-cm) power
cord will come installed on the range and
taped to the back for shipping.
Power cord location
26_ installation requirements
130521_(Install)_NX58F5700WS_DG68-00518A_EN+CFR.indb 26 04/06/2013 17:45:45