Technical Information - Fracarro FRPRO EVO HD Guide Rapide

•
By selecting "OUTPUT", is possible to define the total RF output level from 93dBuV to 113dBuV
maximum output depending from the total amount multiplexes managed from the FRPRO EVO HD.
•
By selecting "SLOPE", is possible to set a -9dB slope between the VHF and latest UHF frequencies
managed from the FRPRO EVO HD.
Advanced and Miscellaneous settings
•
Select "ADVANCED" menù if is necessary to modify the remote
in VHF/UHF inputs), for
download/upload the configuration).
•
Select "EXIT" menù for lock/unlock the FRPRO EVO HD and for decide the

Technical information

You can download FRPRO EVO HD's full manual from the product's page at
Fracarro code
Input
N° input
Frequency range
Input level
LTE Protection
RF Output
Ouput power
Gain (Adjustment)
Output total adjustment
Output total slope adjustment
Selectivity
Typical Output MER
General features (*)
Power Supply
Power consumptions
Remote power supply
Dimensions (L.× H.× W.)
Operating temperature
Weight
(*)Definitive specifications may change without notice.
Garantito da/ Guaranteed by/ Garanti par/ Garantizado por/ Garantido por/ Garantiert durch/ Zajamčena od/
Garantirano od/ Garantovano od/ Gwarantowane przez / Εγγυημένο από/ Гарантировано
Fracarro Radioindustrie SRL, Via Cazzaro n. 3, 31033 Castelfranco Veneto (Tv) – Italy
UPGRADE the FIRMWARE or for the SD card management (Format,
FRPRO EVO HD (*)
N°
MHz
dBμV
MHz
dBμV
dB
dB
dB
dB
dB
Vac, Hz
W
Vdc, mA
mm
°C
Kg
DC VOLTAGE
"LOCK
www.fracarro.com
287434
4x VHF/UHF + 1x FM
FM: 88 – 108
VHF: 174 – 240
UHF: 470 – 862
FM: 37 – 77
VHF: 40 – 109
UHF: 40 – 109
Automatic selection: 694, 790 or disabled
FM: 113 (60dB/IM3)
VHF/UHF: 120 (60dB/IM3)
VHF/UHF: 113 (for 1 MUX)
VHF/UHF 110 (for 6 MUX)
FM: 35 (20)
VHF: >45 (auto AGC)
UHF: >55 (auto AGC)
20
9
35@1MHz
VHF: 35
UHF: 35
100 – 240, 50/60
16 (typical)
12 or 24, 100 total (for the 4 inputs)
217x165x59
-5 ÷ +50
0.8
(12V or 24V available only
CODE".