Bluetooth Mode - Mobile TV Twin Notice

ENGLISH ENGLISH
STEP 3
Plug in and turn to lock.
.
STEP 4
Finished and enjoy your music!
OPERATION INSTRUCTION

Bluetooth mode

1. Power on: long press button for 3 to 5 seconds. Then you will hear the voice prompt with the indicator
light flashing. Bluetooth searching mode starts automatically after power on.
2. Switch on Bluetooth searching mode on the cell phone. After pairing successfully, the device name
(Soundbar Twin) will be shown connected on the cell phone, then you can open phone player and play
songs. Due to different brands of mobile phone and Bluetooth versions, the searching and pairing time
will be various. Under normal circumstances, it only takes 30 seconds. If pairing password is needed,
please type „0000" on the cell phone.
3. Long press „+" „-" to volume up / down.
4. Short press „+" „-" to switch song.
5. Short press ►| button to play or pause music.
TV mode
1. Insert the 3.5 mm jack into the speaker and connect the Cinch connector with the TV's Cinch output.
2. Turn on the speaker. It will automatically switch into AUX mode. If the speaker is in a different mode,
switch to AUX mode using the mode selector.
3. Hold down + or – to turn the speaker volume up or down.
4. Briefly press ►| to start or pause the music.
ATTENTION: Make sure the TV has a Cinch audio output. Make sure the Cinch connector is correctly
connected with the Cinch audio output on the TV. If the TV has a 3.5 mm audio output,
please note the information on the AUX connection method. In AUX mode, the speaker
cannot switch between TV channels and songs.
10