Operation; Function Settings; Setting The Bank And Channel Numbers - Toa WM-D5200 Mode D'emploi

7. operation

step 1. Confirm that the wireless microphone and the wireless receiver are identical in the bank
and channel numbers
If not identical, turn the power switch to the OFF position, then set the bank and channel
numbers to the same ones as the receiver.
step 2. Turn the Power switch to the ON position. Then, confirm the battery checker will light green
or orange.
step 3. Turn the Power switch to the OFF position after use.

8. FUnction settings

8.1. setting the Bank and channel numbers

step 1. Switch off the power.
step 2. Rotate
the
counterclockwise to detach it.
step 3. Using the supplied screwdriver, set the
bank selector switch's pointer to the desired
number, and set the channel selector switch's
pointer likewise.
step 4. Replace the battery compartment cover.
10
battery compartment cover
Screwdriver
(accessory)
3
2