Charging Modes - CLAS OE 2040 Mode D'emploi

OE 2040
MULTICHARGER STATION 4 CHANNEL

CHARGING MODES

The voltage/current curve graph
1st Stage: Desulfation:
Focused on deeply discharged or lightly sulfated batteries, which show low voltage and are hard to activate.
The SCM54E Charger will start the charge pulse to charge the battery until the voltage recovers & reaches
expected rechargeable level. The purpose of this stage is to save an over-discharged or a lightly sulfated battery
for recovery.
2nd Stage: Fast Charge:
When the voltage of the battery is above the set level. The SCM54E Charger carries a high current to charge
the battery quickly until the battery is returned to 75% of the charge. The purpose of this stage is to charge
battery in the fastest and most ef cient manner.
3rd Stage: Equalization & Analysis:
When the voltage reaches a maximum safe (pre-determined) voltage, The SCM54E will discontinue the Fast
Charge automatically & start a charge pulse with a smaller steam current to charge the battery. The purpose of
this stage is to fully charge the battery in safe manner.